- Gimpshop Offline Installer Software
- Gimpshop Offline Installer Download
- Gimpshop Offline Installer Windows 10
Gimpshop 2.8 is available for most operating systems, imcluding Windows, Mac OS X, Linux and Solaris. For Developers: Download GIMPshop 2.8 Source Code: Download Source Code. In Mac OS 10.5 and earlier, you will also need X11 or XDarwin in order to launch and run Gimpshop. We recommend you download and install Apple's X11. The reasoning behind GIMPshop is that you like the power of the GIMP, but you want it wrapped up in a more familiar user interface. It basically takes advantage of GIMP?s open-source technology to produce a version of GIMP that will appeal more to Photoshop users who want to try the app without having to learn a whole new interface. Do you mean the portable version of Gimp.or GimpShop.they are two different things. GimpShop is a rather cheesy attempt to hack an older version of Gimp ( 2.2.8 ).
About GIMPshop
GIMPShop 2.8.0 is a simplifed installation package which installs the required packages in order to run GIMP on Windows. Apart from offering a separate installation package, GIMPShop does not offer any extra features which cannot be obtained by downloading the official GIMP packages (which are also available on this site). You should note that the installation package being offered by the distributors of GIMPShop may contain unwanted toolbars and advertisements which are not normally included in the original package available from the open source community or from that offered on Sourceforge. This download is licensed as freeware for the Windows (32-bit and 64-bit) operating system/platform without restrictions. GIMPshop is available to all software users as a free download for Windows.
Is GIMPshop safe to download?We tested the file gimpshop_2.2.8_fix1_setup.exe with 26 antivirus programs and it turned out 100% clean. It's good practice to test any downloads from the Internet with trustworthy antivirus software.
Does GIMPshop work on my version of Windows?Older versions of Windows often have trouble running modern software and thus GIMPshop may run into errors if you're running something like Windows XP. Conversely, much older software that hasn't been updated in years may run into errors while running on newer operating systems like Windows 10. You can always try running older programs in compatibility mode.
Officially supported operating systems include Windows 10, Windows 8, Windows 7, Windows Vista and Windows XP.
What versions of GIMPshop are available?The current version of GIMPshop is 2.8.0 and is the latest version since we last checked. This is the full offline installer setup file for PC. At the moment, only the latest version is available.
What type of graphical file formats are supported?Gimpshop Offline Installer Software
GIMPshop supports over 4 common image formats including BLEND, MPO, PLY and RAW.
Alternatives to GIMPshop available for download
- GIMP PortablePortable Windows version of the popular free image editor GIMP.
- Adobe Photoshop 8 CS
- Adobe Photoshop FreeAdobe Photoshop 6.0 is a powerful photo editing suite with some legacy features available in this free trial version as an alternative to Photoshop CC or..
- GIMPGIMP is an open-source and free Photoshop alternative (for Windows)
- Adobe Photoshop Beta
- Camera Raw for PhotoshopInstalls the Camera Raw which supports Photoshop CS6 and CC.
- Adobe Photoshop CS6Award-winning image editing suite with professional digital imaging tools, effects, filters and plug-in support powered by the Mercury Graphics Engine.
- CorelDRAWLegacy version of a popular graphics editing program with support for photos, web graphics, drawing and various other tools by Corel.
- PC Image EditorFreeware image editing software with many different filters and tools.
- TwistedBrush Pro StudioDigital paint software and photo editor with natural art tools.
Site layout and content is being updated.
Read More
Linux Related -> Tutorials -> How to Compile and Install GIMPShop
How to Install the Linux port of GimpShopOne of the most common complains that most graphics artists have when they try switching to GIMP (GNU Image Manipulation program) is that the user interface for GIMP is clunky and is hard to use. I have facedthe same problem but over time I got used to the GIMP interface so didn't do anything about it.
On the other hand Scott Moschella actually decided to do something about it and spent a lot of time hacking the GIMP source to create GIMPShop where the tools, options, windows, and menus closely resemble Adobe Photoshop's menu structure and naming conventions. This modification makes it really easy for Adobe Photoshop users to switch to GIMP threreby saving a lot of money.
He initially created GIMPShop for the Mac OS and the original package with a Mac Installer is available here. He also made his modified source available so that others can port it to different OS's so I downloaded it to my computer and ported it to Linux. Below is a step by step guide of what I had to do to get it to install on my Debian computer.
Created by: Suramya Tomar
Last updated: 02nd April 2005
This document is Copyright © 02nd April 2004, Suramya Tomar.
It is released to the public under the Creative Commons Attribution-ShareAlike 1.0 License
You are free:
- To copy, distribute, display, and perform the work
- To make derivative works
- To make commercial use of the work
Under the following conditions:
Attribution. You must give the original author credit.
Share Alike. If you alter, transform, or build upon this work, you may distribute the resulting work only under a license identical to this one.
- For any reuse or distribution, you must make clear to others the license terms of this work.
- Any of these conditions can be waived if you get permission from the author.
Use the information in this document at your own risk. I disavow any potential liability for the contents of this document. Use of the concepts, examples, and/or other content of this document is entirely at your own risk. They worked on my system but it doesn't necessarily mean that it would be safe to do the same on your system.
All copyrights are owned by their owners, unless specifically noted otherwise. Use of a term in this document should not be regarded as affecting the validity of any trademark or service mark.
You are strongly recommended to take a backup of your system before performing any of the actions listed in this document .
In this section I have the pleasure of acknowledging the following people without whose input this would have never seen the light of the day:
- Scott Moschella for writing the GIMPShop hack
- Anshuman for creating a RPM installer of GIMPShop
- Creators of GIMP for creating an awesome graphics editor
- My friends and family for brearing with me while I wrote this
The GIMPShop package has a lot of pre-requisites that need to be installed before GIMP can be installed. Since this is a hacked version of GIMP the pre-requisites are the same as the official version. So if you have compiled GIMP from source before you should be able to skip this section without problems.
The following packages are required to install GIMPShop:
- XML::Parser perl module
- GLib >= 2.4.5
- atk >= 1.0.1
- GTK+ >= 2.4.4
- libart-2.0
Install XML::Parser perl module
To install the XML::Parser perl module issue te following command as root:
cpan -i XML::Parser
This assumes that you have the cpan module installed. If thats not the case download the XML::Parser module from here and follow the instructions in the README file to install it)
Install GLib
Before we can install GLib we need to download the latest version of the GLib source. We do that by running the the following command:
wget ftp://ftp.gtk.org/pub/gtk/v2.6/glib-2.6.3.tar.gz
Now that we have the latest version of the source we can install it on our system. To do that we must first uncompress the archive so issue the following command:
tar -zxf glib-2.6.3.tar.gz
Once tar finishes uncompressing the archive change to the glib directory using the following command:
cd glib-2.6.3
Now we configure GLib by running the following command:
./configure --prefix=/usr
Once the configuration is complete and you don't see any errors compile GLib by running the following command:
make
If the compile finishes without errors install GLib by running the following command as root
make install
Install atk
Before we can install atk we need to download the latest version of the atk source. We do that by running the the following command:
wget ftp://ftp.gtk.org/pub/gtk/v2.6/atk-1.9.0.tar.bz2
Now that we have the latest version of the source we can install it on our system. To do that we must first uncompress the archive so issue the following command:
tar -jxf atk-1.9.0.tar.bz2
Once tar finishes uncompressing the archive change to the atk directory using the following command:
cd atk-1.9.0
Now we configure atk by running the following command:
./configure --prefix=/usr
Once the configuration is complete and you don't see any errors compile atk by running the following command:
make
If the compile finishes without errors install atk by running the following command as root
make install
Install pango
Before we can install pango we need to download the latest version of the pango source. We do that by running the the following command:
wget ftp://ftp.gtk.org/pub/gtk/v2.6/pango-1.8.1.tar.gz
Now that we have the latest version of the source we can install it on our system. To do that we must first uncompress the archive so issue the following command:
tar -zxf pango-1.8.1.tar.gz
Once tar finishes uncompressing the archive change to the pango directory using the following command:
cd pango-1.8.1
Now we configure pango by running the following command:
./configure --prefix=/usr
Once the configuration is complete and you don't see any errors compile pango by running the following command:
make
If the compile finishes without errors install pango by running the following command as root
make install
Install libtiff
Before we can install libtiff we need to download the latest version of the libtiff source. We do that by visiting the the following website: http://dl.maptools.org/dl/libtiff/
Now that we have the latest version of the source we can install it on our system. To do that we must first uncompress the archive so issue the following command:
tar -zxf tiff-3.7.2.tar.gz
Once tar finishes uncompressing the archive change to the libtiff directory using the following command:
cd tiff-3.7.2
Now we configure libtiff by running the following command:
./configure --prefix=/usr
Once the configuration is complete and you don't see any errors compile libtiff by running the following command:
make
If the compile finishes without errors install libtiff by running the following command as root
make install
Install GTK+
Before we can install GTK+ we need to download the latest version of the GTK+ source. Adobe full version for mac. We do that by running the the following command:
wget ftp://ftp.gtk.org/pub/gtk/v2.6/gtk+-2.6.4.tar.gz
Now that we have the latest version of the source we can install it on our system. To do that we must first uncompress the archive so issue the following command:
tar -zxf gtk+-2.6.4.tar.gz
Once tar finishes uncompressing the archive change to the GTK+ directory using the following command:
cd gtk+-2.6.4
Now we configure GTK+ by running the following command:
./configure --prefix=/usr
Once the configuration is complete and you don't see any errors compile GTK+ by running the following command:
make
If the compile finishes without errors install GTK+ by running the following command as root
make install
Install libart-2.0
Before we can install libart-2.0 we need to download the latest version of the libart-2.0 source. We do that by running the the following command:
wget ftp://ftp.gnome.org/pub/gnome/sources/libart_lgpl/2.3/libart_lgpl-2.3.17.tar.gz
Now that we have the latest version of the source we can install it on our system. To do that we must first uncompress the archive so issue the following command:
tar -zxf libart_lgpl-2.3.17.tar.gz
Once tar finishes uncompressing the archive change to the libart-2.0 directory using the following command:
cd libart_lgpl-2.3.17
Now we configure libart-2.0 by running the following command:
Download google chrome offline installer x64. ./configure --prefix=/usr
Once the configuration is complete and you don't see any errors compile libart-2.0 by running the following command:
make
If the compile finishes without errors install libart-2.0 by running the following command as root
make install
Now that we have installed all the pre-requisites we can install GIMPShop. Now we can either install GIMPShop from the source or install it using the Debian dpkg installer.
Install using Debian dpkg installer
Download the Debian package for GIMPShop from Here. Install the package by running the following command as root:
Gimpshop Offline Installer Download
dpkg -i gimp_2.2.4-2_i386.deb
Install from Source
Before we can install GIMPShop we need to download the latest version of the GIMPShop source. We do that from Here
Now that we have the latest version of the source we can install it on our system. To do that we must first uncompress the archive so issue the following command:
tar -jxf GIMPshop-source-2.2.4.tbz
Once tar finishes uncompressing the archive change to the GIMPShop directory using the following command:
cd gimp-2.2
Now we configure GIMPShop by running the following command:
./configure --prefix=/usr
Once the configuration is complete and you don't see any errors compile GIMPShop by running the following command:
make
If the compile finishes without errors install GIMPShop by running the following command as root
make install
To run the server run the following command from a command prompt: Adobe pdf 9 0 mac.
/usr/bin/gimp
Now you should have a working install of GIMPShop. If you like it drop a note to Scott and let him know that he did a great job. If you think this document helped you or you have some comments or questions about this please feel free to Contact Me and let me know. However I must warn you that I am a somewhat lazy person who might take a little while before replying to your emails.
Thanks for your time
- Suramya Tomar
02nd April 2005
Gimpshop Offline Installer Windows 10
- Original Source for GIMPShop: http://plasticbugs.com/
- Official GIMP Site: http://www.gimp.org
- Original Gimp.app site: http://gimp-app.sourceforge.net/
- RPM for GIMPShop: http://www.codemills.com/uploadfiles/memberfiles/gimpshop.rpm.torrent
- Debian Package: gimp_2.2.4-2_i386.deb
- XML::Parser Download site: http://search.cpan.org/~msergeant/XML-Parser-2.34
- Download site for GLib: ftp://ftp.gtk.org/pub/gtk/v2.6/glib-2.6.3.tar.gz
- Download site for atk: ftp://ftp.gtk.org/pub/gtk/v2.6/atk-1.9.0.tar.bz2
- Download site for pango: ftp://ftp.gtk.org/pub/gtk/v2.6/pango-1.8.1.tar.gz
- Download site for Libtiff: http://dl.maptools.org/dl/libtiff/
- Download site for libart: ftp://ftp.gnome.org/pub/gnome/sources/libart_lgpl/2.3/libart_lgpl-2.3.17.tar.gz
- Download site for GTK+: ftp://ftp.gtk.org/pub/gtk/v2.6/gtk+-2.6.4.tar.gz
Home | About Me | About India |Hotlinks | Linux Related |
Mirror | Misc Section | My Blog | Photogallery | Scripts | Tech Section | Contact Me